Christmas Lighting – Ten Steps to Stay Safe

In many streets of Great Britain, the Christmas lights are a great event. If a street has an annual Christmas lighting competition, it often leads to covered houses from the porch to the fireplace with electric lights of all colors. Here are some things to remember to stay safe with all your electric lighting this Christmas.
1. When purchasing any electric light, read and follow the manufacturer’s instructions and keep the instructions for future reference. 2. Check all Christmas lights for damage and for exposed loose wires.
3. When replacing a bulb, always use the same bulb type and rating as originally supplied with the lights. Any exterior lighting must be connected via a 30 mA RCD protected socket. An RCBO could also be installed to provide additional protection against electrical shock.
4. Replace defective lamps immediately to avoid overheating. If the lamps are not replaceable, the entire lighting product may need to be replaced.
5. Any flammable decorations or other materials that burn easily should be kept away from all electrical lighting.
6. Turn off all  best christmas light clips lights before bed each night.
7. Retain the packaging for safe storage. Avoid storage in humid or excessively hot conditions.
8. Never use electric lights outdoors, unless they are specially designed for such use.
9. Never overload plugs and try to avoid using extension cords or adapters. 10. Never remove or insert lamps while chain is connected to supply.
If someone suffers an electric shock, always turn off the power supply before removing the victim from danger if it is safe to do so. Contact emergency services immediately. Check the location of your fuse box, so you can quickly reach it in the event of an emergency. The Christmas lights work with the mains voltage (230 volts) or with a very low voltage. This information must be indicated on the packaging. The safest Christmas lights operate at a very low voltage through a transformer, which will reduce the risk of electric shock if there is a leak or a broken light bulb.
The most common types of electric lights used for Christmas lights are traditional filament (incandescent) bulbs, which use mains voltage or very low voltage.
LED (light-emitting diode) lights are the safest form of Christmas lights. LEDs only work at very low voltage. They use much less energy than traditional lights and produce less heat. A special plastic is used to make an LED light, which means there is no glass to break or peel.
In 2009, a commission report was released revealing that 30% of randomly tested Christmas lights failed basic safety checks. The main risks highlighted were electric shock and fire outbreaks. When buying any electric light, always go to a reputable dealer where basic standards must be guaranteed.
Every year electric lighting helps transform a dull fir tree into a magical Christmas tree. Taking note of the tips and information should ensure the safety of you and your loved ones this Christmas.